RIDGID 258 / 700 258 Cutter with No. 700, 115V

Powered by the RIDGID No. 700 Power Drive, the 258 is a displacement cutter that provides square cuts. The operator controls the feeding rate by pumping the hydraulic foot pump throughout the operation. A square cut with minimal burr on either 6 m or nipple lengths of pipe is achieved quickly** without abrasive dust, sparks, or open flame. Also, the RIDGID Pipe Roller for beveling can be used to rotate the pipe while a second operator uses a grinder to bevel the pipe. Some of the 258 advantages are:

• Square cut 6 m or nipple lengths of pipe without effort.
• Easily cuts by displacing instead of removing pipe material.
• No abrasive dust, dangerous sparks, or open flame.
• Quickly cuts steel pipe with minimal burr.
• Great for cutting pipe for groove joining.
• Heavy-duty design is perfect for field or shop use.
• Adaptable for beveling.

Specifications

• Cutting Capacity: 21⁄2″ (65 mm) to 8″ (200 mm) schedule 10*/40 steel pipe.
• Model 700 Power Drive (included with Cat No. 17871 and 17881).
• Power Drive RPM: 26-30 (no load).
• Weight: 105 lbs. (48 kg) (excludes No. 700 Power Drive, see page 4.15).

Standard Equipment

• One RIDGID 774 Square Drive Adapter.
• One 81⁄2″ (215 mm) HD Cutter Wheel Assembly.
• One Hydraulic Ram and Foot Pump.
• Two 21⁄2″ (65 mm) to 12″ (300 mm) Ball Transfer Pipe Supports.
• *Use the thin wall cutter wheel for best results.
• **Cutting time varies with pipe schedule and diameter.
• Note: Model 258 is not recommended to cut cast iron pipe.
• For optimum wheel life always properly support the work piece with ball transfer pipe supports.